1.On the desktop, click Start and select Settings > Control Panel > Administrative Tools > Computer Management to display the Computer Management window.
2.Click Device Manager and then scroll down the list of hardware devices to Network Adapters and click the plus (+). This expands the list of adapters currently configured. For example, HP NC510x PCle 10 Gigabit Server Adapter is listed in the example above and is removed with the following step.
3.
To uninstall dual port 10GbE adapter driver software in Windows, perform the following steps:
1.On the desktop, click Start and select Settings > Control Panel > Administrative Tools > Computer Management to display the Computer Management window.
2.Click Device Manager and then scroll down the list of hardware devices to Network Adapters and click the plus (+). This expands the list of adapters currently configured.
3.Locate the two ports listed under Network adapters.
For example, HP NC 512m Dual Port 10GbE Multifunction
4.
5.
6.Locate the NetXen Management Interface listed under System devices in the Device Manager display.
7.
Adapter support on Windows
The following describes how to install HP
•Windows Server 2008
•Windows Server 2008 x64
•Windows Server 2003
•Windows Server 2003 x64
Windows 2008 drivers
The following Windows Server 2008 network adapter drivers are used in this release:
•N1G60i32.sys for NC310xx, NC340x, NC61xx, and NC71xx server adapters
•Q57ND60X.sys for NC10xx, NC150x, NC32xx, NC10xx, NC67xx, and NC77xx server adapters
•N1E6032.sys for NC110x, NC360x, NC364x server adapters
•BXND60X.sys for all Multifunction server adapters
Components for these drivers are located in the \WIN2008 directory of the HP SoftPaq.
Installation 10
