Dell T110 Removing the Expansion Card Stabilizer, Installing the Expansion Card Stabilizer

Figure 3-11. Removing or Installing a Hard Drive From a Hard Drive Bracket

1

2

			3
1	hard drive	2	hard drive bracket
3	blue tabs (2)

Expansion Card Stabilizer

Removing the Expansion Card Stabilizer

1Turn off the system and attached peripherals. Disconnect the system from the electrical outlet and peripherals.

2Open the system. See "Opening the System" on page 57.

3Press the release tab and lift the expansion card stabilizer out of slots in the chassis. See Figure 3-12.

Installing the Expansion Card Stabilizer

1Slide the edge of the expansion card stabilizer into the slots in the cooling shroud and chassis until the release tab locks into place. See Figure 3-12.

72

Installing System Components