Dell T110 owner manual Installing Memory Modules, Alignment key

Figure 3-14. Installing and Removing a Memory Module

1

2

3

1 memory module 2 memory module socket ejectors (2)

3 alignment key

Installing Memory Modules

WARNING: The memory modules are hot to touch for some time after the system has been powered down. Allow time for the memory modules to cool before handling them. Handle the memory modules by the card edges and avoid touching the components on the memory module.

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

CAUTION: To ensure proper system cooling, memory-module blanks must be installed in any memory socket that is not occupied. Remove memory-module blanks only if you intend to install memory in those sockets.

1Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and peripherals.

2Open the system. See "Opening the System" on page 57.

Installing System Components

83