
Option | Description |
|
|
USB Flash Drive | Determines the emulation type for a USB flash drive. |
Emulation Type | Hard disk allows the USB flash drive to act as a hard |
(Auto default) | drive. Floppy allows the USB flash drive to act as a |
| removable diskette drive. |
| Auto automatically chooses the appropriate emulation |
| type for the device. If you install a device in this slot that |
| is configured as a removable diskette drive, you must |
| manually set the emulation type to Floppy. |
Boot Sequence Retry | If this field is enabled and the system has failed to boot, |
(Disabled default) | the system will reattempt to boot after 30 seconds. |
|
|
Integrated Devices Screen
Option | Description |
|
|
User Accessible | Enables or disables the user accessible USB ports. |
USB Ports | Options are All Ports On, Only Back Ports On, and All |
(All Ports On default) | Ports Off. |
Internal USB Port | Enables or disables the internal USB port. |
(On default) |
|
Embedded Gb NIC1 | Enables or disables the integrated NIC. Options are |
(NIC1 default: Enabled | Enabled, Enabled with PXE, Enabled with iSCSI Boot, |
with PXE; | and Disabled. PXE support allows the system to boot |
Other NICs: Enabled) | from the network. |
MAC Address | Displays the MAC address for the integrated NIC. |
OS Watchdog Timer | Sets a timer to monitor the operating system for activity, |
(Disabled default) | and aids in recovery if the system stops responding. |
| When Enabled, the operating system is allowed to |
| initialize the timer. When Disabled, the timer is not |
| initialized. |
| NOTE: This feature is usable only with operating systems |
| that support WDAT implementations of the Advanced |
| Configuration and Power Interface (ACPI) 3.0b |
| specification. |
42
Using the System Setup Program and UEFI Boot Manager