Option | Description |
| Note |
Disabled (*) | No device selected |
| (*) = Default setting |
Disk On Chip |
|
| |
PEROM 512 KB | Programmable and Erasable ROM |
|
|
SRAM 512 KB | Static RAM - size 512 KB |
|
|
DiskOnChip Map
This option allows to chose the starting address of Disk On Chip (DOC) memory window
Option | Description |
| Note |
0CC000h | The starting address is 0CC000h |
|
|
0D0000h | The starting address is 0D0000h |
|
|
0D4000h | The starting address is 0D4000h |
|
|
0D8000h | The starting address is 0D8000h |
|
|
0DC000h | The starting address is 0DC000h |
|
|
0E0000h | The starting address is 0E0000h |
|
|
0E4000h | The starting address is 0E4000h |
|
|
0E8000h (*) | The starting address is 0E8000h |
| (*) = Default setting |
IMPORTANT NOTE: |
| With Win NT | |
Keyboard
If the keyboard is not really necessary in the system, you can disable it. In this way the system can bootstrap ignoring the keyboard.
| Option |
| Description |
| Note |
| Not Present (*) |
| Keyboard presence ignored |
| Useful for embedded systems |
| Present |
| BIOS look for keyboard |
| (*) = Default setting |
|
|
|
|
Quick Boot
With quick boot enabled, the system takes less than 5 seconds for a bootstrapping. This improvement is obtained to the disadvantage of BIOS tests (the setup must be correct and the peripheral must be connected to the module and ready at the boot); in particular the following test are skipped:
system memory pattern test
keyboard detection
floppy disk presence (seek test)
44
