65
If you select the [/V] [/K] [/D] [/C] parameters, the VP connection will be performed according to the following rules:
¾Only the selected remote peripherals are redirected in VP connection.
¾The local peripherals connected are used according to the setup.
¾If the floppy disks are redirected, it is not possible to use the local Host computer floppy for PC operations.
¾The Boot is performed from the selected peripheral.
From now on, the host computer's peripherals selected are at the disposal of the SpacePC 1232 module. It is now possible to boot from the host computer's floppy
Pressing the “printscreen” key will terminate the VP2000 program returning the CPU module to DOS.
To
This message will appear:
Connection on serial port at 3F8H. (=COM1)
Use PrintScreen KEY to EXIT VP2000…
Important note
¾While the VP2000 program is running, the CTRL+ALT+DEL key combination on the host computer causes the restart in the host computer and NOT in the SpacePC 1232 module!
¾The Virtual Peripheral mode doesn’t support the “Format” command.
¾Virtual peripheral handles the BIOS services of the redirected devices. It is therefore not possible to use programs performing direct accesses to video memory, keyboard, floppy disk or hard disk.
65
