To the FDD Cable/Connector
Power Supply |
GND PIN1 |
+5V PIN2 |
To the Parallel Port
Figure 10. Parvus Floppy Disk Drive Adapter
Female Config.
Male Config.
WARNING! TO AVOID MALFUNCTIONS, BE CAREFUL TO CONNECT THE FLOPPY DRIVE CABLE IN THE FOLLOWING WAY:
The most diffuse Floppy Drive flat cable that is possible to find on the market is structured as shown in the following schematic picture. With this type of cable only the second connector can be connected to the Parvus Floppy Disk Drive Adapter. The “FDD connector” end of the cable is connected to the rear connector of the Floppy Drive.
To FDD connector
To FDD adapter
X |
Figure 11. Floppy Drive Cable
J5 and J6 Serial Port Interfaces
Two serial ports are available on connectors J5, J6 of the SpacePC 1232 module. These connectors are 5x2 pin with
24
