Dell T110 owner manual Removing the Chassis Intrusion Switch

Figure 3-20. Removing or Installing a USB Memory Key

1

2

1 USB memory key 2 USB memory key connector

Chassis Intrusion Switch

Removing the Chassis Intrusion Switch

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.

2Open the system. See "Opening the System" on page 57.

3Disconnect the chassis intrusion switch cable from the INTRUSION connector on the system board. See Figure 6-1.

4Slide the chassis intrusion switch out of the securing bracket notch. See Figure 3-21.

96

Installing System Components