Dell T110 owner manual Power Management Screen

Option	Description
Failsafe Baud Rate	Displays the failsafe baud rate used for console
(115200 default)	redirection. BIOS attempts to determine the baud rate
	automatically. This failsafe baud rate is used only if the
	attempt fails. This rate should not be adjusted.
Remote Terminal Type	Sets the remote console terminal type, either
(VT 100/VT220 default)	VT100/VT220 or ANSI.
Redirection After Boot	Enables or disables BIOS console redirection when the
(Enabled default)	operating system is loaded.

Power Management Screen

Option	Description
Power Management	Options are OS Control, Active Power Controller,
(Active Power	Custom, or Maximum Performance. For all but the
Controller default)	Custom setting, the BIOS pre-configures the power
	settings on this screen as follows:
	• OS Control sets the CPU power to OS DBPM, the fan
	power to Minimum Power, and the memory power to
	Maximum Performance. In this setting, all processor
	performance information is passed from the system
	BIOS to the operating system for control. The operating
	system sets the processor performance based on
	processor utilization.
	• Active Power Controller sets the CPU power to System
	DBPM, the fan power to Minimum Power, and the
	memory power to Maximum Performance. The BIOS
	sets the processor performance based on processor
	utilization.
	• Maximum Performance sets all fields to Maximum
	Performance.
	If you select Custom, you can configure each option
	independently.
CPU Power and	Options are OS DBPM, System DBPM, Maximum
Performance	Performance, or Minimum Power.
Management

44

Using the System Setup Program and UEFI Boot Manager