Deleting or Changing an Existing Setup Password
1Enter the System Setup program and select the System Security.
2Highlight Setup Password, press <Enter> to access the setup password window. Press <Enter> twice to clear the existing setup password.
The setting changes to Not Enabled.
3If you want to assign a new setup password, perform the steps in "Assigning a Setup Password" on page 52.
Embedded System Management
The USC is an embedded utility that enables systems and storage management tasks from an embedded environment throughout the server’s lifecycle.
The USC can be started during the boot sequence and can function independent of the operating system.
NOTE: Certain platform configurations may not support the full set of features provided by USC.
The following features of USC are supported on systems with Baseboard Management Controller (BMC):
•Installing an operating system
•Running diagnostics to validate the memory, I/O devices, processors, physical disks, and other peripherals
For more information about setting up USC, configuring hardware and firmware, and deploying the operating system, see the Unified Server Configurator documentation on the Dell Support website at support.dell.com/manuals.
Using the System Setup Program and UEFI Boot Manager
53
