![](/images/new-backgrounds/1147390/147390123x1.webp)
3Remove the front bezel. See "Removing the Front Bezel" on page 59.
4Slide the drive release latch in the direction of the arrow to release the shoulder screw. See Figure
5Pull the tab to remove the EMI filler panel.
Figure 3-5. Removing and Installing the EMI Filler Panel
1
2
3
4
1 | drive release latch | 2 | shoulder screws (2) |
3 | EMI filler panel | 4 | tab |
Installing an EMI Filler Panel
1Gently slide the EMI filler panel into the bay until it clicks into place. See Figure
2Replace the front bezel. See "Installing the Front Bezel" on page 60.
3Close the system. See "Closing the System" on page 58.
62