Message | Causes | Corrective Actions |
|
|
|
Timer chip | Faulty system board. | See "Getting Help" on |
counter 2 failed. |
| page 129. |
|
|
|
TPM | A Trusted Platform Module | Information only. |
configuration | (TPM) configuration |
|
operation | command has been |
|
honored. System | entered. The system will |
|
will now reset. | reboot and execute the |
|
| command. |
|
|
|
|
TPM | This message displays | Enter I or M to proceed. |
configuration | during system restart after |
|
operation is | a TPM configuration |
|
pending. Press | command has been |
|
(I)to Ignore OR entered. User interaction is
(M)to Modify to required to proceed. allow this change
and reset the system.
WARNING: Modifying could prevent security.
TPM failure. A TPM function has failed. See "Getting Help" on page 129.
Unable to launch | System halted after F10 |
System Services | keystroke because System |
image. System | Services image is either |
halted! | corrupted in the system |
| firmware or has been lost |
| due to system board |
| replacement. |
Restart the system and update the USC repository to the latest software to restore full functionality. See the USC user documentation for more information.
Unexpected | Improperly seated memory |
interrupt in | modules or faulty keyboard |
protected mode. | or mouse controller chip. |
Reseat the memory modules. See "Troubleshooting System Memory" on page 113. If the problem persists, see "Getting Help" on page 129.
30
About Your System
