16.Replace the bracket cover on the back of the computer. Figure 2-23Replacing the bracket cover

17.Replace the screw to secure the bracket to the back of the computer. Figure 2-24Replacing the bracket screw

18.Connect external cables to the installed card, if needed. Connect internal cables to the system board, if needed.

19.Reconfigure the computer, if necessary. Refer to the Computer Setup (F10) Utility Guide for instructions on using Computer Setup.

20

Chapter 2 Removal and Replacement Procedures Microtower (MT) Chassis

Page 28
Image 28
HP 500B VS695UT 505B, 500B VS695UT VS695UT#ABA, 500B VS695UT 515B manual