Using Computer Setup (F10) Utilities
Computer Setup can be accessed only by turning the computer on or restarting the system. To access the Computer Setup Utilities menu, complete the following steps:
1.Turn on or restart the computer.
2.As soon as the computer is turned on, press F10 when the monitor light turns green to enter Computer Setup.
NOTE: If you do not press F10 at the appropriate time, you must restart the computer and again press F10 when the monitor light turns green to access the utility.
3.The Computer Setup Utility screen is divided into menu headings and actions. Five menu headings appear on the Computer Setup Utility screen:
●Main
●Advanced
●Power
●Boot
●Exit
Use the arrow keys to select the appropriate heading, then press Enter. Use the arrow (up and down) keys to select the option you want, then press Enter. To return to the previous screen, press Esc.
CAUTION: Do NOT turn the computer power OFF while the ROM is saving the Computer Setup (F10) changes because the CMOS could become corrupted. It is safe to turn off the computer only after exiting the F10 Setup screen.
Computer Setup—Main
NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.
Table A-6 Computer Setup—Main
Option | Description | |
|
| |
System Time | Allows you to set system time. | |
|
| |
System Date | Allows you to set system date. | |
|
| |
Language | Allows you to select language. | |
|
| |
Floppy Diskette A: | Allows you to set drive A to: | |
| ● | Disabled |
| ● | 1.44 MB 3.5” |
| ● | Not Installed |
|
|
|
Model 505B/515B — Computer Setup (F10) Utilities | 59 |
