Computer Setup—Exit

NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.

Table A-5Computer Setup—Exit

Option

Description

 

 

Exit Saving Changes

Press Enter to exit saving changes.

 

 

Exit Discarding

Press Enter to exit discarding changes.

Changes

 

 

 

Load Setup Defaults

Press Enter to load setup defaults.

 

 

Discard Changes

Press Enter to discard changes.

 

 

Save Changes

Press Enter to save changes.

 

 

Model 505B/515B — Computer Setup (F10) Utilities

Use Computer Setup (F10) Utility to do the following:

●Change factory default settings.

●Set the system date and time.

●Set, view, change, or verify the system configuration, including settings for graphics, audio, storage, communications, and input devices.

●View settings for processor and memory.

●Modify the boot order of bootable devices such as hard drives, diskette drives, optical drives, or USB flash media devices.

●Restrict a device from booting the unit.

●Run hard drive self-tests.

●Establish a supervisor password that controls access to Computer Setup (F10) Utility and the settings described in this section.

●Enable or disable removable media boot ability.

58 Appendix A Computer (F10) Setup