12.Use a screwdriver to press the latch at the bottom of the power supply to release it. Figure 2-57Pressing the power supply latch

13.Pull the power supply back and tilt it out of the computer. Figure 2-58Removing the power supply from the computer

To install the power supply, reverse the removal procedure. Note that there is a latch, a guide, and a ledge on the computer that help secure the power supply.

46

Chapter 2 Removal and Replacement Procedures Microtower (MT) Chassis

Page 54
Image 54
HP 500B VS695UT VS695UT#ABA, 500B VS695UT 505B, 500B VS695UT 515B manual