Finish setup
Chapter 3
Note In some countries/regions, the date and time stamp on the fax header is a legal requirement.
If your HP
1.Press Setup.
2.Press 6, and then press 3.
This selects Tools and then selects Date and Time.
3.Enter the month, day, and year by pressing the appropriate numbers on the keypad. Depending on your country/region setting, you might enter the date in a different order.
4.Enter the hours and minutes.
5.If your time is displayed in the
Adjust the volume
Your HP
1.Press Setup.
2.Press 4, and then press 5.
This selects Basic Fax Setup and then selects Ring and Beep Volume.
3.Press to select one of the options: Soft, Loud, or Off.
Note The beeps you hear when pressing buttons maintain the same volume whether you choose Loud or Soft. These two options only affect ring, dial, and other tones you hear when faxing. If you choose Off, however, the sounds of button presses are also turned off.
If you select Off, you will not hear a dial tone, fax tones, or incoming ring tones. With the Ring and Beep Volume set to Off, you cannot send a fax using monitor dialing, such as when using a calling card to send a fax. For more information on monitor dialing, see Send a fax using monitor dialing.
4.Press OK.
Fax setup
After completing all the steps in the Setup Guide, use the instructions in this section to complete your fax setup. Please keep your Setup Guide for later use.
In this section, you will learn how to set up your HP
Tip You can also use the Fax Setup Wizard (Windows) or Fax Setup Utility (Mac) to help you quickly set up some important fax settings such as the answer mode and fax header information. You can access the Fax Setup Wizard (Windows) or Fax Setup Utility (Mac) through the HP Image Zone
18 | HP Officejet 5600 |