Example of a parallel splitter

If your computer has two phone ports, set up your HP All-in-One as described below.

Back view of the HP All-in-One

1Telephone wall jack

2 "IN" phone port on your computer

3 "OUT" phone port on your computer

4 Telephone

5Computer with modem

6Phone cord supplied in the box with your HP All-in-One connected to the "1-LINE" port

To set up your HP All-in-One to a computer with two phone ports

1.Remove the white plug from the port labeled "2-EXT" on the back of your HP All- in-One.

2.Find the phone cord that connects from the back of your computer (your computer modem) to a telephone wall jack. Disconnect the cord from the telephone wall jack and plug it into the port labeled "2-EXT" on the back of your HP All-in-One.

3.Connect a phone to the "OUT" port on the back of your computer modem.

4.Using the phone cord supplied in the box with your HP All-in-One, connect one end to your telephone wall jack, then connect the other end to the port labeled "1- LINE" on the back of your HP All-in-One.

Note If you do not use the supplied cord to connect from the telephone wall jack to your HP All-in-One, you might not be able to fax successfully. This special phone cord is different from the phone cords you might already have in your home or office. If the supplied phone cord is too

setup Finish

User Guide

31