mail, see the appropriate section in this section for additional setup guidelines.
4.Run a fax test. For information, see Test your fax setup.
Case C: Set up your HPIf you are using either a PBX phone system or an ISDN converter/terminal adapter, make sure you do the following:
●If you are using either a PBX or an ISDN converter/terminal adaptor, connect the HP
Note Some ISDN systems allow you to configure the ports for specific phone equipment. For example, you might have assigned one port for telephone and Group 3 fax and another port for multiple purposes. If you have problems when connected to the fax/phone port of your ISDN converter, try using the port designated for multiple purposes; it might be labeled
●If you are using a PBX phone system, set the call waiting tone to "off".
Note Many digital PBX systems include a
●If you are using a PBX phone system, dial the number for an outside line before dialing the fax number.
●Make sure you use the supplied cord to connect from the telephone wall jack to your HP
If you subscribe to a distinctive ring service (through your telephone company) that allows you to have multiple phone numbers on one phone line, each with a different ring pattern, set up your HP
setup Finish
User Guide | 25 |