For additional fax setup information, in specific countries/regions, see the Fax Configuration website listed below.

Austria

www.hp.com/at/faxconfig

 

 

Germany

www.hp.com/de/faxconfig

 

 

Switzerland (French)

www.hp.com/ch/fr/faxconfig

 

 

Switzerland (German)

www.hp.com/ch/de/faxconfig

 

 

United Kingdom

www.hp.com/uk/faxconfig

 

 

Case A: Separate fax line (no voice calls received)

If you have a separate phone line on which you receive no voice calls, and you have no other equipment connected on this phone line, set up your HP All-in-One as described in this section.

Back view of the HP All-in-One

1 Telephone wall jack

2 Phone cord supplied in the box with your HP All-in-One connected to the "1-LINE" port

To set up your HP All-in-One with a separate fax line

1.Using the phone cord supplied in the box with your HP All-in-One, connect one end to your telephone wall jack, then connect the other end to the port labeled "1- LINE" on the back of your HP All-in-One.

Note If you do not use the supplied cord to connect from the telephone wall jack to your HP All-in-One, you might not be able to fax successfully. This special phone cord is different from the phone cords you might already have in your home or office. If the supplied phone cord is too short, see The phone cord that came with my HP All-in-One is not long enough for information on extending it.

2.Set the Auto Answer setting to On.

For information on changing this setting, see Set the answer mode.

3.(Optional) Change the Rings to Answer setting to the lowest setting (two rings).

setup Finish

User Guide

23