4 Load originals and load paper

This chapter provides instructions for loading originals in the automatic document feeder or on the glass to copy, scan, or fax; choosing the best paper type for your job; loading paper in the input tray; and avoiding paper jams.

Load originals

You can load an original for a copy, fax, or scan job in the automatic document feeder or on the glass. Originals that are loaded in the automatic document feeder will automatically be fed into the HP All-in-One.

Load an original in the automatic document feeder

You can copy, scan, or fax a single- or multiple-page letter-, A4- (up to 25 pages of plain paper), or legal-size document (up to 15 sheets of plain paper) by placing it in the document feeder tray.

Caution Do not load photos in the automatic document feeder; this might cause damage to your photos.

Note Some features, such as the Fit to Page copy feature, do not work when you load your originals in the automatic document feeder. For more information, see Load an original on the glass.

To load an original in the automatic document feeder

1.Load your original, with the print side up, into the document feeder tray. Slide the paper into the automatic document feeder until you hear a beep. This indicates that the HP All-in-One detected the pages you loaded.

The automatic document feeder holds a maximum of 25 sheets of plain paper.

Tip For more help on loading originals in the automatic document feeder, refer to the diagram engraved in the document feeder tray.

2.Slide the paper guides inward until they stop at the left and right edges of the paper.

paper load and originals Load

User Guide

43