short, see The phone cord that came with my HP All-in-One is not long enough for information on extending it.

2.Set the Auto Answer setting to Off.

For information on changing this setting, see Set the answer mode.

3.Run a fax test. For information, see Test your fax setup.

You must be available to respond in person to incoming fax calls, or your HP All-in- One cannot receive faxes. For information on receiving faxes manually, see Receive a fax manually.

Case G: Fax line shared with computer modem (no voice calls received)

If you have a fax line on which you receive no voice calls, and you also have a computer modem connected on this line, set up your HP All-in-One as described in this section.

Since your computer modem shares the phone line with your HP All-in-One, you will not be able to use both your computer modem and your HP All-in-One simultaneously. For example, you cannot use your HP All-in-One for faxing if you are using your computer modem to send an e-mail or access the Internet.

Back view of the HP All-in-One

1Telephone wall jack

2 Phone cord supplied in the box with your HP All-in-One connected to the "1-LINE" port

3 Computer with modem

To set up your HP All-in-One with a computer modem

1.Remove the white plug from the port labeled "2-EXT" on the back of your HP All- in-One.

2.Find the phone cord that connects from the back of your computer (your computer modem) to a telephone wall jack. Disconnect the cord from the telephone wall jack and plug it into the port labeled "2-EXT" on the back of your HP All-in-One.

3.Using the phone cord supplied in the box with your HP All-in-One, connect one end to your telephone wall jack, then connect the other end to the port labeled "1- LINE" on the back of your HP All-in-One.

setup Finish

User Guide

29