3 Scan and copy

Basic scanning steps

Basic copying steps

Scan two-sided originals

Scan a card in the card slot

Load originals

Use the scanner buttons

Scan from HP Smart Document Scan Software

Scan from other software programs

Basic scanning steps

The basic steps for scanning are:

1.Load the originals. For more information, see Load originals.

2.Do one of the following:

Use the Select Profile Number () button on the scanner front panel to select a profile, and then press the Scan Document To () button.

For information about profiles, see Set up profiles.

Open HP Smart Document Scan Software. For more information, see Scan from HP Smart Document Scan Software.

Open another scanning software program. For more information, see Scan from other software programs.

Tip Descriptions of the profiles can be found in the HP Smart Document Scan Software, on the profile label on the pull-down tray on the front of the scanner, or in the Button Settings Utility.

Basic copying steps

The basic steps for copying are:

1.Load the originals. For more information, see Load originals.

2.Use the Number of Copies () button on the scanner front panel to select the number of copies, and then press the Copy () button.

Copies are printed on the computer's default printer.

Scan two-sided originals

The steps for scanning or copying two-sided originals are the same as for one-sided originals. In the HP Smart Document Scan Software, select Duplex (for two-sided printing). The scanner processes both sides of the original in one pass.

12

HP Scanjet 7800 Scanner

Page 14
Image 14
HP 7000 Document manual Scan and copy, Basic scanning steps, Basic copying steps, Scan two-sided originals