Loading a single envelope
•To print a single envelope, use the Single- Envelope Slot so you don’t have to remove the paper from the Paper Tray.
•Load a single envelope as shown, address side facing you and stamp edge down.
Loading multiple envelopes
•Pull the Document Tray forward and remove any paper from the Paper Tray.
•Pinch and slide the right Paper Guide to the envelope position inscribed on the Paper Tray.
•Load up to ten envelopes with the address side facing you and the stamp edge down. Align the right edge of the stack with the right Paper Guide.
•Pinch and slide the left Paper Guide until it just touches the left edge of the envelope stack.
•Push the Document Tray back until it rests against the Paper Tray.
Loading transparencies
•Load transparencies (up to 50) with the adhesive- strip down and facing away from you, and the rough side toward you. The arrows on the adhe- sive strip will be on the side of the transparency away from you.
.........................................................................................................................................
