To unload images to a Windows or Macintosh computer

1Change the camera's USB Protocol setting to MSDC so that the camera will look like a disk drive to the computer. For more information, see “Changing the USB protocol setting” on page 35.

2Connect the camera to the Windows or Macintosh computer with the USB cable.

3Turn on the camera. The letters PC appear in the status LCD to indicate that the camera is connected to the computer. The computer recognizes the camera as a disk drive.

4Use the following procedure to access your images as files:

Windows: Double-click the icon for the newly assigned disk drive in My Computer or navigate to the drive letter in Windows Explorer. Use the Copy and Paste commands to transfer selected images to your hard drive.

Macintosh: Double-click the Untitled drive icon, and then drag and drop the selected files to your hard drive.

Using a card reader

You can use a CF memory card reader, such as the SanDisk ImageMate or a PCMCIA adapter, to view and save image files on your computer. If you have a CF card reader installed on your computer, insert the CF memory card into the card reader. Then, access your images on the CF memory card just as you would access files on a floppy disk.

Card readers can be purchased from www.hpshopping.com (selected countries/regions only), or from your local digital camera or electronics store.

Printing photos on a printer equipped with a card reader

If your printer has a slot for a CF memory card, as the HP photosmart 1000 and higher series printers do, you can print your images directly from the card. For more information, see your printer’s documentation.

40

HP photosmart 715 user guide

Page 48
Image 48
HP 715 manual Using a card reader, Printing photos on a printer equipped with a card reader