Using the camera with a Macintosh computer
You can transfer the images in your digital camera to a Macintosh computer.
System requirements for a Macintosh computer
To work with your camera, your Macintosh computer must meet or exceed the following requirements. For updated system requirements, go to www.hp.com/photosmart.
Operating system | Macintosh OS 8.6 or later |
|
|
Processor | Power PC, 233 MHz |
|
|
Memory (RAM) | OS 8.6 or OS 9: 64 MB |
| OS X: 128 MB |
|
|
Free hard disk space | 150 MB |
|
|
Video display | 800 by 600 pixels, |
|
|
Any speed | |
|
|
Interface | USB port |
|
|
Changing the USB protocol setting
Before you can unload images from the camera to a Macintosh computer, you must change the USB protocol setting to MSDC in the Setup menu on the camera’s image display.
To change the USB protocol setting
1Press the 
button to turn on the image display.
2Press the 
button again to open the main menu, use the
down side of the 
controller to select the Setup menu, and then press OK.
3Use the up or down side of the 
controller to scroll to USB.
Sharing and printing images | 35 |