HP 715 manual Does not, Press a, Button

Problem	Possible cause	Solution
The camera	The AC adapter is	Check the following conditions:
does not turn	not functioning	• The AC power adapter is plugged
on.	correctly.	into an electrical outlet
(continued)		• There is power at the outlet.
		• The AC power adapter is not
		damaged.
		• Make sure you are using the correct
		HP-approved AC adapter.

You have an AC power adapter connected to the camera, but it is not connected to a power source.

When you have an AC adapter connected to the camera, the camera does not use battery power even if the adapter is not connected to a power source. If you want to use battery power, disconnect the AC adapter from the camera. If you want to use AC power, connect the AC adapter to a working electrical outlet.

The camera	The camera is off.	Slide the	switch to turn on
does not		the camera (if you want to take a picture)
respond when
		or turn on the image display (if you want
I press a
		to review your images).
button.
	The camera is	If the status LCD displays the letters
	connected to a	PC, the camera buttons do not respond.
	computer.
	The batteries are	Replace the batteries.
	empty.
	The camera needs	Turn the camera off and then on again.
	to be reset.	Remove the batteries and reinstall them.
		If you are using an AC power adapter,

disconnect the adapter from the camera, remove and reinstall the batteries, and then reconnect the adapter.

50 HP photosmart 715 user guide