Replacing batteries

The camera uses four AA batteries. You can use photo-quality titanium, lithium, or alkaline AA batteries, or rechargeable NiMH

AAbatteries. You can purchase additional batteries from your local camera or electronics store.

Use only batteries that are in good condition. Batteries that show signs of leakage, corrosion or swelling should not be installed in the camera.

Note

If you choose to use rechargeable batteries, you

 

must recharge them in a separate device, outside

 

the camera. The batteries do not recharge in the

 

camera when you connect an AC adapter.

 

 

To insert new batteries

￿Make sure that the camera is off and see “Step 2: Install the batteries” on page 4 for specific instructions.

CAUTION Replace all the batteries at the same time. Do not replace the batteries individually or use batteries of different types. Always follow the instructions on the battery package when handling or disposing of batteries.

Using an AC power adapter

To extend the life of your batteries, use an AC power adapter as your power source when connecting your camera to a computer or when using the image display for an extended period.

CAUTION Use only an AC power adapter that HP has approved for use with the camera. Use of any other adapter will void your warranty and can damage your camera.

Maintaining your camera

43