Chapter 5

Note Use the negative light shield to cover the remaining area in the negative holder if you are scanning fewer than the maximum number of negative frames with the TMA. This ensures that no extra light leaks into the scan.

5.Snap shut any open doors on the template.

6.Place the template on the scanner glass and close the scanner lid. Align the arrow on the template with the corner reference mark on the scanner bed.

7.Do one of the following tasks:

Windows

Do one of the following:

From HP Solution Center, click Scan Film.

Press customizable button 1.

Macintosh

From the HP Device Manager, click Scan Film.

8.Follow the onscreen instructions to complete the scan.

9.When finished, remove the negatives from the template.

10.Replace the TMA cover by pressing the top tab of the TMA cover into place and then pressing the bottom tab into place.

34

HP Scanjet 8300 series

Page 36
Image 36
HP 8300 8300 manual Windows