5.Put the input tray on the ADF. Reload the unscanned pages in the ADF input tray.

6.Resume scanning.

Clear a jam at the end of the paper path

1.Remove any loose pages from the ADF input tray.

2.Gently pull the jammed page out of the ADF in the opposite direction from which the page fed into the ADF.

3.If the jammed page still cannot be removed, lift the lid to its fully open position, loosen the jammed page from the roller on the underside of the lid, and then gently pull the page out of the ADF.

4.Close the ADF lid. Press down firmly on both sides until you hear a click.

5.Re-stack the unscanned pages and reload them into the ADF.

User Guide

59

Page 61
Image 61
HP 8300 8300 manual Clear a jam at the end of the paper path