10.Reconnect all power and data cables to the drives in the
11.Remove the bezel subpanel as described in the Bezel Blanks on page 80 section.
CAUTION: Hold the subpanel straight when you pull it away from the front bezel. Pulling the subpanel away at an angle could damage the pins that align it within the front bezel.
12.Reposition the bezel blanks within the subpanel in the proper orientation for the minitower configuration.
13.Reposition the subpanel (rotate it 90º) with the logo at the bottom, then snap it back into the bezel.
Figure
14.Replace the front bezel and computer access panel.
15.Reconnect the power cord and turn on the computer.
16.Lock any security devices that were disengaged when the computer access panel was removed.
Changing from a Desktop to a Minitower Configuration 121