9.Connect the power cable and data cable to the rear of the optical drive.

NOTE: The power cable for the optical drive is a three-headed cable that is routed from the system board to the hard drive, then to the rear of the optical drive.

10.Rotate the drive cage back down to its normal position.

CAUTION: Be careful not to pinch any cables or wires when rotating the drive cage down.

11.Replace the front bezel (if removed) and access panel.

12.If the computer was on a stand, replace the stand.

13.Reconnect the power cord and turn on the computer.

14.Lock any security devices that were disengaged when the access panel was removed.

Drives 183