Rear Fan
Description | Spare part number |
|
|
Rear fan | |
|
|
The rear fan is secured to the rear right corner of the chassis. You must remove the system board before you can remove the rear fan.
1.Prepare the computer for disassembly (Preparation for Disassembly on page 207).
2.Remove the computer access panel (Access Panel on page 208).
3.Remove the optical drive (Removing the Optical Drive on page 219).
4.Remove the front fan (Front Fan on page 218).
5.Remove the hard drive (Hard Drive on page 222).
6.Remove the optical drive rail (Optical Drive Rail on page 227).
7.Remove the heat sink (Heat sink on page 231).
8.Remove the system board (System Board on page 241).
9.From the outside of the chassis, remove the four Phillips screws that secure the fan to the chassis.
Figure
Rear Fan 243