Populating SODIMM Sockets

There are two SODIMM sockets on the system board, with one socket per channel. The sockets are labeled XMM1 and XMM3. The XMM1 socket operates in memory channel A. The XMM3 socket operates in memory channel B.

Figure 9-7SODIMM Socket Locations

Table 9-1SODIMM Socket Locations

Item

Description

System Board Label

Socket Color

 

 

 

 

1

SODIMM1 socket, Channel B

XMM1

Black

 

 

 

 

2

SODIMM3 socket, Channel A

XMM3

Black

 

 

 

 

The system will automatically operate in single channel mode, dual channel mode, or flex mode, depending on how the SODIMMs are installed.

●The system will operate in single channel mode if the SODIMM sockets are populated in one channel only.

●The system will operate in a higher-performing dual channel mode if the memory capacity of the SODIMM in Channel A is equal to the memory capacity of the SODIMM in Channel B.

●The system will operate in flex mode if the memory capacity of the SODIMM in Channel A is not equal to the memory capacity of the SODIMM in Channel B. In flex mode, the channel populated with the least amount of memory describes the total amount of memory assigned to dual channel and the remainder is assigned to single channel. If one channel will have more memory than the other, the larger amount should be assigned to channel A.

●In any mode, the maximum operational speed is determined by the slowest SODIMM in the system.

Memory 215