Power Switch/LED Assembly
Description | Spare part number |
|
|
Power switch/LED assembly | |
|
|
1.Prepare the computer for disassembly (Preparation for Disassembly on page 75).
2.Remove the access panel (Computer Access Panel on page 123).
3.Remove the front bezel (Front Bezel on page 124).
4.Remove the front fan (Front Fan Assembly on page 147).
5.Disconnect the cable from the system board connector labeled PB/LED.
6.With the computer on its side, press on the tabs on the bottom of the assembly (1) to disengage the assembly from the chassis, and then rotate the bottom of the assembly upward (2) to remove it from the chassis.
Figure
7.Pull the assembly away from the chassis while threading the cable through the hole in front of the chassis.
150 Chapter 7 Removal and Replacement Procedures Microtower (MT) Chassis