10.From the inside of the chassis, slide the fan out from underneath the chassis lip, and then remove the fan.
Figure
To install the rear fan, reverse the removal procedure.
Antennas
Description | Spare part number |
|
|
Antenna Hardware Kit | |
|
|
Two antennas are secured to chassis – one on the front, one on the back. You must remove all other components to remove the antennas.
1.Prepare the computer for disassembly (Preparation for Disassembly on page 207).
2.Remove the computer access panel (Access Panel on page 208).
3.Remove the optical drive (Removing the Optical Drive on page 219).
4.Remove the front fan (Front Fan on page 218).
5.Remove the hard drive (Hard Drive on page 222).
6.Remove the optical drive rail (Optical Drive Rail on page 227).
7.Remove the heat sink (Heat sink on page 231).
8.Remove the system board (System Board on page 241).
9.Remove the rear fan (Rear Fan on page 243).
244 Chapter 9 Removal and Replacement Procedures