Front I/O, USB Assembly
Description | Spare part number |
|
|
Front I/O and USB assembly | |
|
|
The front I/O, USB assembly is mounted to the front of the chassis and is removed by pulling it away from the chassis.
1.Prepare the computer for disassembly (Preparation for Disassembly on page 75).
2.Remove the computer access panel (Access Panel on page 76).
3.Remove the front bezel (Front Bezel on page 77).
4.Disconnect the three cables from the following system board connectors:
●Yellow connector labeled FRONT USB
●Green connector labeled FRONT USB2
●Blue connector labeled FRONT AUD
NOTE: The blue FRONT AUD connector is not located near the other two connectors used for the front I/O assembly. See the following image for its location.
Front I/O, USB Assembly 105