Device lists and load balancing
Multiple devices for backup
When configuring a backup specification, you can specify several standalone devices or multiple drives in a library device that will be used for the operation. In this case, the operation is faster because data is backed up in parallel to multiple devices (drives).
Balancing the use of devices
By default, Data Protector automatically balances the load (the usage) of devices so that they are used evenly. This is called load balancing. Load balancing optimizes the usage by balancing the number of the objects backed up to each device. Since load balancing is done automatically during backup time, you do not have to manage the allocation of objects to devices used in the session; you just specify the devices to be used.
When to use load balancing
Use load balancing when:
•You back up a large number of objects.
•You use library (autochanger) devices with several drives.
•You do not need to know on which media objects will be backed up.
•You have a good network connection.
•You want to increase the robustness of the backup. Data Protector automatically redirects the backup operation from failed devices to other devices in a device list.
When not to use load balancing
Do not use load balancing when:
•You want to back up a small number of large objects. In this case Data Protector often cannot effectively balance the load among devices.
•You want to explicitly select to which device each object will be backed up.
Device chaining
Data Protector allows you to configure several standalone devices of the same type, connected to the same system, as a device chain. When a medium in one device
Concepts guide | 155 |