Setting Power Save
The Power Save function allows you to set an idle time after which the camera automatically sets to sleep mode to save power. After a minute of being in sleep mode, the camera eventually turns off power.
This function is not available in the following instances:
•Recording a video or audio file
•Playing a slideshow/video/audio file
•Using the USB connector
Setting LCD Save
Enable the LCD Save function to automatically decrease the LCD brightness to conserve battery power. When the camera is idle for 20 seconds, the LCD darkens. Press any button to resume to normal brightness.
•The camera is idle when no buttons are pressed. LCD Save, though enabled, does not function during video playback, slideshow, video recording and
Setting Date & Time
Use the Date & Time function to set the date and time of your camera. This function is useful in attaching date stamps on captured images. Your camera uses a
Setting Language
Specify in which language menus and messages are to be displayed on the LCD monitor.
1.Use the navigation control to scroll through the list and select the desired language.
2.Tap your selection to confirm and apply settings.
Setting File Numbering
This function allows you to select the method in which to assign file numbers to images. Available settings are:
•Series. Assigns number to files in sequence even if the folder is changed.
•Reset. Starts from 0001 each time the folder is changed.
To understand folder and file structure of your camera, see “About Folder and File Names” on page 71.
65
