HP Pro 6300 B5N09UT#ABA, D8C61UT#ABA, C6Y70UT#ABA, C6Z94UT, Pro 6300 C9H79UT#ABA manual

2.Disconnect the drive cables from the rear of the drive, or, if you are removing a media card reader, disconnect the USB cable from the system board as indicated in the following illustration.

Figure 3-27Disconnecting the Media Card Reader USB Cable

3.Press down on the green drive retainer button located on the left side of the drive to disengage the drive from the drive cage (1). While pressing the drive retainer button, slide the drive back until it stops, then lift it up and out of the drive cage (2).

Figure 3-28Removing a 3.5-inch Drive (Media Card Reader Shown)

68 Chapter 3 Small Form Factor (SFF) Hardware Upgrades