HP C6Z94UT, D8C61UT#ABA, C6Y70UT#ABA Removing and Replacing a Removable 3.5-inch Sata Hard Drive

BRemoving and Replacing a Removable 3.5-inch SATA Hard Drive

Some models are equipped with a Removable SATA Hard Drive Enclosure in the 5.25-inch internal drive bay. The hard drive is housed in a carrier that can be quickly and easily removed from the drive bay. To remove and replace a drive in the carrier:

NOTE: Before you remove the old hard drive, be sure to back up the data from the old hard drive so that you can transfer the data to the new hard drive.

1.Unlock the hard drive carrier with the key provided and slide the carrier out of the enclosure.

2.Remove the screw from the rear of the carrier (1) and slide the top cover off the carrier (2). Figure B-1Removing the Carrier Cover

85