Removal and Replacement Procedures -
8.8Chassis Fan
1.Prepare the computer for disassembly (Section 8.1).
2.Remove the computer access panel (Section 8.3).
3.Remove any MultiBay device in the drive cage (Section 8.4).
4.Remove the MultiBay riser card (Section 8.5).
5.Remove the front panel assembly (Section 8.6).
6.Remove the four screws that secure the chassis fan to the housing 1.
7.Remove the fan 2.
To install the fan assembly, reverse the removal procedures, making sure that the fan cable is located near the top of the assembly nearest the center of the front panel assembly.
Service Reference Guide, dc7600 |