Setup Utilities and Diagnostics Features

Heading

Option

Description

 

 

 

Storage

Boot Order

Allows you to:

(continued)

 

• Specify the order in which attached devices (such as a USB

 

 

 

 

flash media device, diskette drive, hard drive, optical drive, or

 

 

network interface card) are checked for a bootable operating

 

 

system image. Each device on the list may be individually

 

 

excluded from or included for consideration as a bootable

 

 

operating system source.

 

 

• Specify the order of attached hard drives. The first hard drive in

 

 

the order will have priority in the boot sequence and will be

 

 

recognized as drive C (if any devices are attached).

 

 

✎ MS-DOS drive lettering assignments may not apply after a

 

 

non-MS-DOS operating system has started.

 

 

Shortcut to Temporarily Override Boot Order

 

 

To boot one time from a device other than the default device

 

 

specified in Boot Order, restart the computer and press F9 when the

 

 

monitor light turns green. After POST is completed, a list of bootable

 

 

devices is displayed. Use the arrow keys to select the preferred

 

 

bootable device and press Enter. The computer then boots from the

 

 

selected non-default device for this one time.

 

 

 

Security

Smart Card

Allows you to enable/disable the Smart Card to be used in place of

 

Options

the Power-On Password. This option only appears if a Smart Card

 

 

reader is attached to the system.

 

 

 

 

Setup Password

Allows you to set and enables setup (administrator) password.

 

 

✎ If the setup password is set, it is required to change Computer

 

 

Setup options, flash the ROM, and make changes to certain plug

 

 

and play settings under Windows.

 

 

 

 

Power-On

Allows you to set and enable power-on password.

 

Password

 

 

 

 

 

Password Options

Allows you to:

 

(This selection will

• Lock legacy resources (appears if a setup password is set)

 

appear only if a

 

• Enable/disable network server mode (appears if a power-on

 

power-on

 

password is set)

 

password is set.)

 

• Specify whether the password is required for warm boot

 

 

 

 

(CTRL+ALT+DEL). (appears if a power-on password is set)

 

 

 

 

Smart Cover

Allows you to:

 

 

• Lock/unlock the Cover Lock.

 

 

• Set the Cover Removal Sensor to Disable/Notify User/Setup

 

 

Password.

 

 

✎ Notify User alerts the user that the sensor has detected that the

 

 

cover has been removed. Setup Password requires that the setup

 

 

password be entered to boot the computer if the sensor detects

 

 

that the cover has been removed.

 

 

This feature is supported on some models only.

✎Support for specific Computer Setup options may vary depending on the hardware configuration.

2–8

390742-002

Service Reference Guide, dc7600