Removal and Replacement Procedures - Convertible Minitower (CMT) Chassis

6.2 Unlocking the Smart Cover Lock

If you have locked the Smart Cover Lock use Computer Setup to unlock the lock. Refer to the Desktop Management Guide on the Documentation and Diagnostics CD for more information

about the Smart Cover Lock.

If you cannot access Computer Setup to unlock the cover you will need to remove the locking solenoid by using the Smart Cover FailSafe Key (Spare part number 166527-001 or

166527-002). Once the solenoid has been deactivated or removed the access panel can be removed.

The Smart Cover FailSafe Key will be needed in any of the following circumstances:

Power outage

Startup failure

Processor or power supply failure

Lost password

1.Using the Smart Cover FailSafe Key, remove the two tamper-proof screws that secure the Smart Cover Lock to the inside of the chassis.

2. Remove the access panel (Section 6.5).

To reattach the Smart Cover Lock, secure the lock in place with the two tamper-proof screws.

6–2

390742-002

Service Reference Guide, dc7600