Desktop Management
Computer Setup Utilities (F10) Security Features (Continued)Feature | Description |
Password Options
(This selection will appear only if a
Allows you to:
•Lock legacy resources (appears if a setup password is set).
•Enable/disable network server mode.
•Specify whether the password is required for warm boot (CTRL+ALT+DEL) (appears if a
Smart Cover | Allows you to: |
| • Enable/disable the Cover Lock. |
| • Enable/disable the Cover Removal Sensor. |
| ✎ Notify User alerts the user that the sensor has detected that |
| the cover has been removed. Setup Password requires that |
| the setup password be entered to boot the computer if the |
| sensor detects that the cover has been removed. |
| This feature is supported on some models only and will only |
| appear if a Smart Card reader is attached to the system. |
|
|
Embedded Security | Allows you to: |
| • Enable/disable the Embedded Security device. |
| • Reset the device to Factory Settings. |
| • Enable/disable |
| models) |
| • Reset authentication credential. (some models) |
|
|
Device Security | Enables/disables serial ports, parallel port, front USB ports, |
| system audio, internal speakers (some models) network |
| controllers (some models), MultiBay devices (some models), |
| SMBus controller (some models), SCSI controllers (some |
| models), and Embedded security device (some models). |
|
|
Network Service Boot | Enables/disables the computer’s ability to boot from an |
| operating system installed on a network server. (Feature |
| available on NIC models only; the network controller must |
| reside on the PCI bus or be embedded on the system board.) |
|
|
System IDs | Allows you to set: |
•Asset tag
Chassis serial number or Universal Unique Identifier (UUID) number. The UUID can only be updated if the current chassis serial number is invalid. (These ID numbers are normally set in the factory and are used to uniquely identify the system.)
•Keyboard locale setting (for example, English or German) for System ID entry.
✎For more information about Computer Setup, see the Computer Setup (F10) Utility Guide. Support for security features may vary depending on your specific computer configuration.
Service Reference Guide, dc7600 |