![](/images/new-backgrounds/1316003/31600355x1.webp)
Mounting the Monitor
The monitor panel can be attached to a wall, swing arm, or other mounting fixture.
You can attach the monitor panel to a mounting fixture using the HP Quick Release 2 mounting bracket or you can attach the monitor panel to a mounting fixture without the HP Quick Release 2 mounting bracket.
NOTE: This apparatus is intended to be supported by UL or CSA Listed wall mount bracket.
CAUTION: This monitor supports the VESA industry standard 100 mm mounting holes. To attach a
Mounting the Monitor Using the Quick Release 2 Mounting Bracket
To mount the monitor panel to a mounting fixture using the Quick Release 2 mounting bracket:
1.Remove the four screws holding the mounting plate to the head of the stand.