Fingerprint reader board
NOTE: The fingerprint reader board does not include the fingerprint reader board cable. The fingerprint reader board cable is included in the Cable Kit, spare part number
Description | Spare part number |
|
|
Fingerprint reader board (includes bracket) | |
|
|
Before removing the fingerprint reader board, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 52), and then remove the following components:
●Optical drive (see Optical drive on page 53)
●Hard drive (see Hard drive on page 56)
●Keyboard (see Keyboard on page 65)
●Top cover (see Top cover on page 68)
Remove the fingerprint reader board, bracket, and cable:
1.Turn the top cover upside down, with the front toward you.
2.Release the fingerprint reader board cable (1) from the surface of the top cover. Remove the two Phillips PM2.0×2.0 screws (2) that secure the fingerprint reader board and bracket to the
top cover.
72 | Chapter 4 Removal and replacement procedures |
