SD Card reader board
NOTE: The SD Card reader board does not include the SD Card reader board cable. The SD Card reader board cable is included in the Cable Kit, spare part number
Description | Spare part number |
|
|
SD Card reader board | |
|
|
Before removing the SD Card reader board, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 52), and then remove the following components:
●Optical drive (see Optical drive on page 53)
●Hard drive (see Hard drive on page 56)
●Keyboard (see Keyboard on page 65)
●Top cover (see Top cover on page 68)
Remove the SD Card reader board and cable:
1.Release the ZIF connector to which the SD Card reader board cable is connected, and then disconnect the SD Card reader board cable (1) from the system board.
2.Remove the two Phillips PM2.5×5.0 screws (2) that secure the SD Card reader board to the base enclosure.
78 | Chapter 4 Removal and replacement procedures |
