Table C-1Numeric Codes and Text Messages (continued)

Control panel message

Description

Recommended action

 

 

 

 

 

 

 

cord, restore the original memory

 

 

 

configuration, and reboot the computer.

 

 

4.

If the error persists, replace the system

 

 

 

board.

 

 

 

 

2202-PMM Deallocation Error during MEBx

Memory error during POST execution of the

1.

Reboot the computer.

cleanup

Management Engine (ME) BIOS Extensions

2.

Unplug the power cord, re-seat the

 

option ROM

 

 

 

memory modules, and reboot the

 

 

 

computer.

 

 

3.

If the memory configuration was

 

 

 

recently changed, unplug the power

 

 

 

cord, restore the original memory

 

 

 

configuration, and reboot the computer.

 

 

4.

If the error persists, replace the system

 

 

 

board.

 

 

 

 

2203-Setup error during MEBx execution

MEBx selection or exit resulted in a setup

1.

Reboot the computer.

 

failure.

2.

Unplug the power cord, re-seat the

 

 

 

 

 

memory modules, and reboot the

 

 

 

computer.

 

 

3.

If the memory configuration was

 

 

 

recently changed, unplug the power

 

 

 

cord, restore the original memory

 

 

 

configuration, and reboot the computer.

 

 

4.

If the error persists, replace the system

 

 

 

board.

 

 

 

 

2204-Inventory error during MEBx execution

BIOS information passed to the MEBx

1.

Reboot the computer.

 

resulted in a failure.

2.

If the error persists, update to the latest

 

 

 

 

 

BIOS version.

 

 

3.

If the error still persists, replace the

 

 

 

system board.

 

 

 

 

2205-Interface error during MEBx execution

MEBx operation experienced a hardware

1.

Reboot the computer.

 

error during communication with ME.

2.

If the error persists, update to the latest

 

 

 

 

 

BIOS version.

 

 

3.

If the error still persists, replace the

 

 

 

system board.

 

 

 

 

Invalid Electronic Serial Number

Electronic serial number has become

1.

Run Computer Setup. If Setup already

 

corrupted.

 

has data in the field or will not allow

 

 

 

the serial number to be entered,

 

 

 

download from http://www.hp.com

 

 

 

and run SP5572.EXE (SNZERO.EXE).

 

 

2.

Run Computer Setup and try to enter

 

 

 

serial number under Security, System

 

 

 

ID, then save changes.

Network Server Mode Active and No

Keyboard failure while Network Server Mode

Keyboard Attached

enabled.

1.Reconnect keyboard with computer turned off.

2.Check connector for bent or missing pins.

ENWW

POST Numeric Codes and Text Messages 109