Table
SATA Channel 1 Master | For each, allows you to: | ||
SATA Channel 2 Master | ● | run HDD | |
|
| ● | SMART Status Check |
|
| ● HDD Short | |
|
| ● HDD Extended | |
| ● set extended IDE drive on selected channel to: | ||
|
| ● | None |
|
| ● | Auto |
| ● set access mode on selected channel to: | ||
|
| ● | Large |
|
| ● | Auto |
| ● | view: | |
|
| ● | Firmware Version |
|
| ● | Capacity |
|
| ● | Cylinder |
|
| ● | Head |
|
| ● | Precomp |
|
| ● | Landing Zone |
|
| ● | Sector |
|
| ||
Floppy Controller | Disables/enables the floppy disk controller. | ||
|
| ||
Drive A | Allows you to set Drive A to: | ||
| ● | None | |
| ● | 1.44M, 3.5 in. | |
|
| ||
Halt On | Allows you to set POST error behavior to: | ||
| ● | All Errors | |
| ● | No Errors | |
| ● | All but Keyboard | |
| ● | All but Diskette | |
| ● | All but Diskette/Keyboard | |
|
| ||
POST Delay | Allows you to set a POST delay to: | ||
| ● | 0 seconds | |
| ● | 5 seconds | |
| ● | 10 seconds | |
|
|
|
|
ENWW | Computer Setup (F10) Utilities 7 |